$69.95
The Greenmont EasyPushbar™ adjustable push handle extender. Adjusts from 15.5″ to 24″ wide. Supports up to 250 pounds. Available in 4″ and 6″ heights. Compatible with both the RoughRider and Aurora.
The Greenmont EasyPushbar™ is an attachable push handle extender designed for the RoughRider and Aurora. It adjusts from 15.5″ to 24″ wide and supports up to 250 pounds. The bar fastens in seconds and is available in 4″ and 6″ heights.
The extender makes it easier to push the wheelchair straight with one hand and allows the pusher to stand upright rather than bending over while pushing from behind. The ergonomic design reduces strain on the back and shoulders during extended pushing.
Compatible with both the RoughRider and Aurora.
| Weight | 0.0001 lbs |
|---|---|
| Dimensions | 0.0001 × 0.0001 × 0.0001 in |
| Size | 4" height, 6" height |
To find the distance between your hips, first position yourself seated with pelvis upright on a firm surface. Then, measure the distance between the widest points of the hips and thighs without compressing any tissue. Finally, record your measurements. It is important not to have a chair that is wider than necessary as it will be harder to push and may prevent you from passing through narrow doorways.
Position yourself seated upright on a firm surface. Measure the length of your upper leg, the distance from behind the knee to the back of the pelvis (back of your lower leg). Subtract 1/2” to find the maximum seat depth, to allow for space between the back of the knee/upper leg and seat fabric. Record the final measurement.
Your preferred backrest height is determined by your personal comfort level and physical ability. Whirlwind recommends, generally, that the top of the back support should fall just beneath the bottom of the shoulder blade. For less active riders who require more torso support, the back support should be higher, falling just beneath the armpit. Position yourself seated upright on a firm surface. Hold your hands flat against the surface you are sitting on. Measure the distance from the seated surface to the desired, most comfortable point for support on your back. To this number add the height of your cushion when you are sitting on it. Record the measurement.
Backrest angles are determined by the torso control of the rider. Whirlwind recommends that those with less torso control, such as quadriplegics, sit with a backrest angled further backwards to avoid falling forward in a wheelchair. Those with more torso control, such as amputees, can sit with the backrest more upright. Proper backrest angle is best determined by an occupational therapist or healthcare professional. Although there is only one option – 8 degrees – in the drop-down list below, you can adjust the backrest angle by adjusting the backrest straps (i.e. looser at the bottom and tighter at the top for a more erect position).
Now please enter your measurements into the fields on the product page before ordering. For more information about measuring, please refer to the RoughRider Fitting Sheet. You are responsible for choosing the right chair for yourself. If you are uncomfortable with determining your wheelchair size, please consult a professional.
